

MOTOR PURR
RESTORE YOUR PERFORMANCE - SINCE 1967
US Phone (409) 787-1321
Engine Carbon, Soot & Sludge Cleaners for Gasoline and Diesel Engines
Motor Purr's powerful cleaning formulas help remove stubborn engine deposits that contribute to rough idle, hesitation, power loss, poor mileage, and other performance problems.
Fulfillment and Return Policy
Shipping rate is FLAT FEE $6.95 for all orders. Shipping is UPS 3-5 day ground, depending on your location. However, UPS doesn't guarantee delivery date. Orders received by 3 PM Central Time will ship same-day if at all possible. Refund Policy: Customer can request a full refund within 30 days of delivery. Physical returns are not required. If requested, refunds are issued immediately, and you may keep, donate, or dispose of the item. Return shipping fee: $0 (Free).
Alternate Phone Number
512-775-1947

OIL BURNING / EXCESSIVE OIL CONSUMPTION
Excessive oil consumption isn't always caused by worn-out engine parts. Carbon, sludge, and hard varnish can interfere with piston rings, oil drainage, and crankcase ventilation, allowing engine oil to enter the combustion chamber and burn. These deposits can develop even in newer engines and despite regular oil changes.
Motor Purr targets deposit-related problems in three areas:
1. Fuel System (Fuel Injector Cleaner),
2. Crankcase (Tune Up), and
3. Air Intake (Tune Up with our separate IV Tube delivery method).
For oil burning, the crankcase and piston-ring area are especially important.
-
Piston Rings and Ring Grooves: Hard carbon and varnish can cause oil-control rings to stick, preventing them from properly scraping excess oil from cylinder walls. Oil then enters the combustion chamber and burns.
-
Piston Oil Drain-Back Holes: Carbon and sludge can obstruct small oil-return passages behind the oil-control rings, preventing proper drainage and contributing to excessive oil consumption.
-
PCV Valve and Passages: Sludge and deposits can restrict crankcase ventilation or interfere with PCV operation, potentially increasing oil consumption through the intake system.
-
Valve Stem Seals and Guides: Deposits may interfere with valve movement or contribute to seal deterioration, allowing oil to enter the cylinders. Often, hardened or dry seals might only need renewal (our Tune Up), not replacement. Mechanical inspection may not be necessary.
Before assuming your engine needs expensive repairs, consider whether carbon contamination or old seals may be contributing to its oil consumption. Deposit-related problems may respond to appropriate cleaning, while worn or damaged components require mechanical repair.